TECHNICAL SPECIFICATIONS: |
Specifications | AS- 8520 |
Light source | 630nm Visible Red LED |
Optical system | 2048 pixel CCD (charge-coupled device) |
Depth of scan field | 0-600 mm (Code39, PCS=90%, 20mil) |
Scanning width | 160mm |
Scan speed | 450 scan/sec |
Resolution | 0.1mm (4mil) Code39, PCS=90%, on contact |
Print contrast | 30% or more |
Scanning angle | Front: 60° ,Rear: 60° ,Yaw: 75° |
Decode capability | Autodiscriminates all standard barcodes; including GS1 databar Other symbologies can be ordered optionally |
Beeper operation | 7 tones or no beep |
Indicator | Green & Red Led (2 more LED for 8520 cradle) |
Length | 164 mm |
Width-handle | 30 mm |
Width-head | 78 mm |
Depth-handle | 56 mm |
Depth-head | 35 mm |
Weight | 250g (battery included) |
Radio range | 100 meters |
Radio frequency | Type: GFSK Modulation Frequency: 2.4~2.483 GHZ Power: 0.25~2.5mw ; Adaptive Frequency System |
Connector type | RJ-45 phone jack connector |
Case material | ABS plastic (over molded at contact pointed) |
Input voltage | 5 VDC ± 0.25V |
Power - operating | 900 mW |
Power - standby | 150 mW |
Current - operating | 225 mA @ 4.2 VDC |
Current - standby | 32 mA @ 4.2 VDC |
Operating Temperature | 0°C to 50°C (32°F to 122°F) |
Storage | -20°C to 70°C (-4°F to 158°F) (battery not included for 8510) |
Humidity | 10% to 90% relative humidity, non-condensing |
Light level | Up to 70000 lux |
Shock | 1.5m drop onto concrete (90cm for 8520 cradle) |
Programming method | Manual (Reading special barcodes) DOS command through RS232, Windows configuration program |
Contaminants | Seals to resist airborne particulate contaminants ( IP 42 ) |
Program upgrade | Enabled by build-in flash memory |
EMC | T3A078 |
Programmable characteristics | Code type selection, check digit selection, Decoding option, Transmitted character delay, header selection, trailer selection, message suffix, good read beep tone and volume, scanner trigger selection Keyboard emulation type (intermessage delay, keyboard type and keyboard language) Serial interface type (ACK/NAK, Xon/Xoff, RTS/CTS, good read LED control, start/ stop bits) Cordless type (special cordless transmission character settings for 8020CL & 8520)
|